Market leader
- 5G, 4G LTE, NB-IoT
- 2× SIM + eSIM
- SFP Interface
- Extension ready – mPCIe
Performance
- Serial SCADA protocols
- Static & Dynamic routing
- Advanced diagnostics, API
- Hybrid networks
Security
- IPsec, OpenVPN
- RADIUS, SNMPv3
- Firewall, VLAN
- Digitally signed FW
Reliability
- Industrial hardened design
- Approved for Power substations
- Operating Temperature: -40 to +70 °C
- MTBF > 100 years, Made in Czechia, EU
Connectivity
Models
Available in:
5G and/or 4G LTE, with or without WiFi option.
Accessories
Optionals:
1. Antenna LTE/UMTS/GSM 2.0 dBi, 3 m, SMA connector
2. Antenna GPS Active:3-5V, 5m, Magnetic, SMA connector
3. Antenna MIMO LTE/UMTS/GSM 2.0 dBi, 3 m, 2xSMA con
4. PSU DC, 85-264VAC,120-370VDC/24VDC/15W, DIN
5. SFP module, 2 fibres, SM, LC, 20 km, EDGE Technologies
6. M!DGE3 bracket for flat surface mounting *
7. M!DGE3 bracket for side mounting *
* M!DGE3 DIN rail mount is included in the unit.
Specifications
| Cellular interface | ||
| 5G* | ||
| Available on motherboard M!DGE3 | ||
| Frequency bands for extension module ‘Q’ Cellular | 5G (SA and NSA) n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n30, n38, n40, n41, n48, n53, n66, n70, n71, n75, n76, n77, n78, n79 |
|
| 4G LTE Advanced-Pro B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B34, B38, B39, B40, B41, B42, B43, B46, B48, B66, B71, B75, B76 |
||
| 3G UMTS/HSPA+ B1, B2, B4, B5, B8 |
||
| Cinterion MV32-W-A | FCC ID QIPMV32-W-A | |
| Specification for module ‘Q’ Cellular | 4× SMA Antenna | |
| 5G NR 3GPP Release 16 FR1 (Sub 6G) Data throughput (max. @ 5G FR1 SA) DL 3.5 Gb/s, UL 900 Mb/s DL 4×4 MIMO / UL 2×2 MIMO |
||
| 4G LTE 3GPP Release 15 Long Term Evolution (LTE) UE Cat 19 (DL 1.6 Gb/s, UL 211 Mb/s) 7× DL CA, 2× UL CA (Intra-band), 5× DL CA+ 4 × 4 MIMO (Up to UE Cat 20) |
||
| 3G UMTS/HSDPA/HSUPA 3GPP Release 8 DC-HSPA+ – DL Cat 24 (42 Mb/s) / UL Cat 6 (5.76 Mb/s) HSUPA – UL 5.76 Mb/s |
||
| 4G | ||
| Available on motherboard M!DGE3, M!DGE3e* or mPCIe extension board | ||
| Frequency bands for extension module ‘W’ Cellular | 4G LTE (also 5G NSA) Band 1 (2100 MHz), Band 2 (1900 MHz), Band 3 (1800 MHz), Band 4 (2100 MHz), Band 5 (850 MHz), Band 7 (2600 MHz), Band 8 (900 MHz), Band 12 (700 MHz), Band 13 (700 MHz)**, Band 18 (850 MHz), Band 19 (850 MHz), Band 20 (800 MHz), Band 26 (850 MHz), Band 28 (700 MHz), Band 38 (2600 MHz), Band 40 (2300 MHz), Band 41 (2500 MHz), Band 66 (2100 MHz) ** a sensitivity issue will occur in GNSS when transmitting in band 13 |
|
| 3G UMTS/HSDPA/HSUPA Band 1 (2100 MHz), Band 2 (1900 MHz), Band 3 (1800 MHz), Band 4 (2100 MHz), Band 5 (850 MHz), Band 6 (850 MHz), Band 8 (900 MHz), Band 19 (850 MHz) |
||
| 2G GSM/GPRS/EDGE GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz,PCS 1900 MHz |
||
| Cinterion PLS83-W | FCC ID QIPPLS83-W TAC 35107264 |
|
| Specification for module ‘W’ Cellular | ANT1, ANT2 – space diversity | 2× SMA Antenna |
| 4G LTE (also 5G NSA) 3GPP Release 10 Long Term Evolution (LTE) Evolved Uni. Terrestrial Radio Access (E-UTRA) Frequency Division Duplex (FDD) DL Multi-Input Multi-Output (MIMO) 2×2 |
||
| 3G UMTS/HSDPA/HSUPA 3GPP Release 7 Dual-Cell HS Packet Access (DC-HSPA+) UMTS Terrestrial Radio Access (UTRA) Frequency Division Duplex (FDD) DL Rx diversity |
||
| 2G GSM/GPRS/EDGE 3GPP Release 4 Enhanced Data rate GSM Evolution (EDGE) GSM EGPRS Radio Access (GERA) Time Division Multiple Access (TDMA) DL Advanced Rx Performance Phase 1 |
||
| Data rates up to 150 Mb/s downlink / 50 Mb/s uplink | ||
| LTE 450 NB IoT | ||
| Available on motherboard M!DGE3, M!DGE3e* or mPCIe extension board | ||
| Frequency bands for extension module ‘M’ Cellular | LTE Cat M1: Band 1 (2100 MHz), Band 3 (1800 MHz), Band 8 (900 MHz), Band 20 (800 MHz), Band 28 (700 MHz), Band 31 (450 MHz), Band 72 (450 MHz) | |
| LTE Cat NB1/2: Band 1 (2100 MHz), Band 3 (1800 MHz), Band 8 (900 MHz), Band 20 (800 MHz), Band 28 (700 MHz), Band 31 (450 MHz), Band 72 (450 MHz) | ||
| Cinterion TX62-W-C | ||
| Frequency bands for extension module ‘O’ Cellular | LTE Cat M1: Band 1 (2100 MHz), Band 2 (1900 MHz), Band 3 (1800 MHz), Band 4 (AWS-1), Band 5 (850 MHz), Band 8 (900 MHz), Band 12 (700 MHz), Band 13 (700 MHz), Band 18 (800 MHz), Band 19 (800 MHz), Band 20 (800 MHz), Band 25 (1900 MHz), Band 26 (800 MHz), Band 27 (800 MHz), Band 28 (700 MHz), Band 66 (AWS-3), Band 85 (700 MHz) | |
| LTE Cat NB1/2: Band 1 (2100 MHz), Band 2 (1900 MHz), Band 3 (1800 MHz), Band 4 (AWS-1), Band 5 (850 MHz), Band 8 (900 MHz), Band 12 (700 MHz), Band 13 (700 MHz), Band 18 (800 MHz), Band 19 (800 MHz), Band 20 (800 MHz), Band 25 (1900 MHz), Band 26 (800 MHz), Band 28 (700 MHz), Band 66 (AWS-3), Band 71 (600 MHz), Band 85 (700 MHz) | ||
| Cinterion TX62-W-B | FCC QIPTX62-W-B | |
| Specification for extension module ‘M’ and ‘O’ Cellular | ANT1 | 1× SMA Antenna |
| LTE Cat M1 – DL: max. 300 kb/s, UL: max. 1.1 Mb/s LTE Cat NB 1 – DL: max. 27 kb/s, UL: max. 63 kb/s LTE Cat NB 2 – DL: max. 124 kb/s, UL: max. 158 kb/s |
||
| 3GPP Release 14 | ||
| Half Duplex – Frequency Division Duplex (HD-FDD) | ||
| * Pending | ||
| Electrical | M!DGE3 | M!DGE3e | |||
| Primary power | 10 to 50 VDC, negative GND | ||||
| Rx | 4.8 W / 24 V, see details | ||||
| Tx | 7.8 W / 24 V, see details | ||||
| Sleep mode | 0.01 W | ||||
| Interfaces | |||||
| SIM slots | 2× Micro SIM + 1× eSIM1) | 2× Micro SIM | |||
| Ethernet | 10/100/1000 Base-T, Auto MDX, bridged or routed | 4× RJ45 | 10/100/1000 Base-T, Auto MDX, bridged or routed | 2× RJ45 | |
| SFP | 10/100/1000Base-T or 1000Base-SX or 1000Base-LX |
1× SFP | No SFP | ||
| Serial | 1× RS232/RS485 SW configurable 2× RS232 (mPCIe expansion board) 600 b/s – 1 Mb/s |
Terminals 1× RJ45 |
1× RS232/RS485 SW configurable 600 b/s – 1 Mb/s |
Terminals | |
| USB | USB 3.0/Host A | ||||
| Inputs/Outputs | 1× HW alarm input, 1× HW alarm output, 1× Sleep input – Power connector RJ45 | ||||
| 2× DI, 2× DO, 1× difDI (when mPCIe-COMS is not used) | No | ||||
| Antenna | 2× SMA female – receiver diversity (2×2 MIMO) | ||||
| Optional Expansions | 1× mPCIe: Cellular module (‘W’ or ‘M’ or ‘O’) or 2× RS232 or GPS | No | |||
| 1) eSIM for 5G only | |||||
| Optional interfaces | ||
| Extension module ‘G’ GPS (GNSS) |
Active antenna 3.3 VDC SMA female (EXT1 on bottom) | |
| 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN | ||
| Extension module ‘C’ COM ports |
COM2: RS232 – 5 pin (RxD, TxD, GND, RTS, CTS) 600 b/s to 2 Mb/s COM3: RS232 -3 pin (RxD, TxD, GND) 2.4 kb/s to 921.6 kb/s RJ45 (DI/DO on front panel) |
|
| Extension module ‘W’, ‘M’, ‘O’ Cellular |
see Cellular interface | |
| Extension module ‘F’ Wi-Fi |
IEEE 802.11a/b/g/n/ac 2×2 MIMO 20 MHz / 40 MHz for 2.4 GHz 20 MHz / 40 MHz / 80 MHz for 5 GHzWPA/WPA2 PSK WPA3-SAE AES/TKIP hardware encryptionOutput power up to 16 dBmRealtek RTL8822CE |
|
| Indication LEDs | |||
| LED panel | 5× tri-color status LEDs (SYS, WAN, EXT, VPN, COM) | ||
| ETH | 4× RJ45 (Link and Activity LEDs), 1× SFP (Status LED) | ||
| Environmental | |||
| IP Code (Ingress Protection) | IP40, for indoor use only | ||
| MTBF (Mean Time Between Failure) | > 900 000 hours (> 100 years) | ||
| Service life of system | >= 15 years | ||
| Operating temperature | −40 to +70 °C ( −40 to +158 °F) | ||
| Operating humidity | 5 to 95 % non-condensing | ||
| Storage | −40 to +85 °C ( −40 to +185 °F) / 5 to 95 % non-condensing | ||
| Mechanical | |||
| Casing | Metal | ||
| Dimensions | H×W×D: 132×43×110 mm (5.20×1.69×4.33 in) | ||
| Weight | 0.50 kg (1.1 lbs) | ||
| Mounting | DIN rail, optionally: flat-bracket or corner-bracket | ||
| SW | |||
| User protocols on COM | DNP3, DF1, IEC101, Modbus RTU, PR2000, RDS, Siemens 3964(R), COMLI, SAIA S-bus, Mars-A, PPP, UNI, Async Link | ||
| User protocols on Ethernet | Modbus TCP, IEC104, DNP3 TCP, Comli TCP, Terminal server… | ||
| Serial to IP convertors | DNP3 / DNP3 TCP, Modbus RTU / Modbus TCP | ||
| Routing | Static, Dynamic – Babel, OSPF, BGP, Link management | ||
| QoS | 8 levels on all interfaces | ||
| Security | |||
| Management | HTTPS (Web Interface or Application Programming Interface) | ||
| Role-based access control (RBAC) | 4 levels (Guest, Tech, SecTech, Admin) | ||
| WiFi management access (optional) | WPA2-PSK secured | ||
| VPN | IPsec, OpenVPN, GRE | ||
| VLAN | IEEE 802.1Q (tagging) | ||
| AAA protocol | RADIUS | ||
| Firewall | Layer 2 – MAC, Layer 3 – IP, Layer 4 – TCP/UDP | ||
| FW | Digitally signed | ||
| HW tamper | Case opening evidence (N/A for M!DGE3e) | ||
| Diagnostic and Management | |
| Link testing | ICMP ping |
| Status information | User interfaces |
| Statistics | Historical and differential statistics for Rx / Tx Packets on all user interfaces (e.g. ETH 1-5, COM 1-3, TS 1-5) |
| Statistics history | Several weeks |
| Event log | Events filtered by time, severity, user, remote IP address and type of event |
| SNMP | SNMPv1, SNMPv2c, SNMPv3 Trap / Inform notifications generation as per settings |
| NTP | Client / Server |
| Monitoring | Real time analysis of all interfaces (e.g. ETH 1-5 , COM 1-3, TS 1-5) and internal interfaces between software modules, see details |
| Standards | |
| CE, FCC, ISED | RED; RoHS; WEEE |
| Spectrum | ETSI EN 301 511 V12.5.1 ETSI EN 301 908-01 V13.1.1 ETSI EN 301 908-02 V11.1.2 ETSI EN 301 908-13 V13.1.1 ETSI EN 303 413 V1.1.1 |
| EMC (electromagnetic compatibility) |
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-5 V3.2.1 ETSI EN 301 489-19 V2.1.0 ETSI EN 301 489-52 V1.1.0 |
| Product safety | EN 62368-1:2014 + A11:2017 |
| RF health safety | EN 62311:2008 |
| Electric power substations environment |
IEEE 1613:2009 IEEE 1613.1:2013 EN 61850-3:2014 |
| Environmental | EN 61850-3: 2014 |
| Vibration & shock | EN 60068-2-6:2008 ETS 300 019-2-3:1994, Class 3.4 EN 61850-3:2014 |
| Seismic qualification | EN 60068-2-27:2010 |
| IP rating | EN 60529:1993 + A1:2001 + A2:2014 |
Contact Sales
Call us and one of our experts will answer your questions or fill out the form in our contact page to have an expert call you to learn how our solutions can excel your business.
T: 1-289-796-0522 (M-F 9:30AM-5PM EST)